English
Coal based granular activated carbon is made from high-quality anthracite coal as raw material, refined using advanced technology, and produced using high-temperature steam activation technology. It is then crushed, screened, and finely processed into granular activated carbon. The appearance is black amorphous particles. It has advantages such as developed pore structure, large specific area, strong adsorption capacity, high mechanical strength, low bed resistance, good chemical stability, easy regeneration, and durability. It has a unique advantage due to its large specific surface area, especially the large volume of micropores. It has strong adsorption capacity for organic matter, free chlorine, and harmful gases in various types of water, and is an excellent adsorbent for deep purification of urban drinking water. It is also used to remove bacteria and toxic gas components in the air.
Product Details
PRODUCT DETAILS
Coal based granular activated carbon is made from high-quality anthracite coal as raw material, refined using advanced technology, and produced using high-temperature steam activation technology. It is then crushed, screened, and finely processed into granular activated carbon. The appearance is black amorphous particles.
It has advantages such as developed pore structure, large specific area, strong adsorption capacity, high mechanical strength, low bed resistance, good chemical stability, easy regeneration, and durability. It has a unique advantage due to its large specific surface area, especially the large volume of micropores. It has strong adsorption capacity for organic matter, free chlorine, and harmful gases in various types of water, and is an excellent adsorbent for deep purification of urban drinking water. It is also used to remove bacteria and toxic gas components in the air.
|
Particle size (mesh) |
4-8，8-24，30-60 |
|
Iodine adsorption value (mg/g) |
≥900 |
|
Strength (℅) |
≥93 |
|
Moisture (℅) |
≤10 |
|
Ash content (℅) charge |
≤10 |
|
Filling specific gravity (g/cm3) |
0.4-0.5 |
|
PH value |
6-10 |
|
Methylene blue decolorizing power （mg/g） |
＞150 |
Related Products
In 1985, Datong Locomotive Works realized that electric locomotives were the important development direction of China railway locomotive and rolling stock industry in the future, and put forward the production layout idea of "Nanzhu (Zhuzhou Electric Locomotive Works) and Datong Locomotive Works".
Shaoshan Type 3 electric locomotive is my country’s second generation 6-axle passenger and cargo locomotive. The locomotive adopts bridge-type full-wave rectification and realizes thyristor phase-controlled smooth voltage regulation. The locomotive adopts single-phase AC 25kV 50Hz voltage system and has a maximum operating speed of 100km/h.
The SS3B fixed heavy-duty electric locomotive is a 12-axle freight electric locomotive. It consists of two identical 6-axle locomotives connected by a coupler and a windshield. The two sections are equipped with electrical system high-voltage connectors, control cables, and network shielding. Line and air system control ducts. The entire vehicle can be controlled synchronously from any cab. The locomotive adopts single-phase power frequency system, voltage 25kV, AC-DC transmission, and the maximum operating speed of the locomotive is 100km/h.
Shaoshan 4 improved electric locomotive is an 8-axle freight locomotive. The locomotive consists of two identical four-axle locomotives connected by a coupler and a windshield. The two workshops are equipped with high-voltage connectors for the electrical system, reconnection control cables and air brake system control ducts. The entire vehicle can be synchronously controlled from the driver's cab of any one of the vehicles. The two locomotives can also be separated and used independently as a four-axle locomotive.